Voltage

電壓

Voltage rated: AC220V 50/60HZ

額定電壓： AC220V 50/60HZ

Working Temperature

工作溫度

Max. Temperature: 1400℃( 1 hr)

最高溫度：1400℃ (1小時)

Continuous working temperature: ≤1350℃

持續工作溫度：≤1350℃

Recommended heating rate:≤10℃/min

推薦升溫速率：≤10℃/min

Temperature Controller

控溫方式

PID automatic control and auto-tune function.

模糊PID控制和自整定調節

30 programmable segments for precise thermal processing.

智能化30段可編程控制

Built-in protection for the over-heated and broken thermocouple. 

超溫和斷偶報警功能

Length of heating zone

加熱區長度

760mm

Length of constant zone

恒溫區長度

500mm

Heating Elements

加熱元件

Silicon carbide rod

硅碳棒

Processing tube

爐管

Ceramic tube:60/80*1200mm(optional）

剛玉管：60/80*1200mm/1200mm（管徑可選）

Tube blocks are included for blocking heat radiation generated from tube center. Must be fully inserted into the furnace chamber before heating at the correct position.

兩個管堵阻擋管中心產生的熱輻射,必須在加熱前且放置在爐膛的正確位置.

Temperature Accuracy

控溫精度

+/- 1℃

Vacuum Flange

真空法蘭
  

clamp flange and folding flange denpends on the diameter of tube

根據管徑不同，法蘭分為卡箍和折頁兩種.

Vacuum Pressure

真空壓力

133torr can be achieved by mechanical pump

機械泵可達133torr（1pa）

10^-5 torr can be reached by molecular pump

分子泵可達10^-5torr（10^-3pa）

Please click the picture below to order vacuum pump

點擊下列圖片訂購真空部件
    

Warranty

質保

Two year limited warranty with lifetime support (Such consumable parts as tube, quartz block, and O-rings, etc. are NOT supported by the warranty)

二年質保終身支持（消耗品如爐管，石英管堵，O型圈等不在質保范圍內）

Warning

注意事項

Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.

在使用過程中爐膛表面可能出現細小裂紋。這是正常情況，裂紋可以用氧化鋁涂層修復。

Compliance

認證

CE Certified

CE認證

The furnace is ready to pass TUV (UL61010) or CSA certification at extra cost.

可付費進行TUV(UL61010)或CSA認證

Operation instructions

操作指導

Click to download the operating manual

點擊下載說明書